How to Install a Plug-in Wall Sconce: A Step-by-Step Guide

Introduction

A plug-in wall sconce is a great addition to any home, as it provides versatile lighting options without the need for hardwiring or professional installation. Not only is it easy to install, but a plug-in sconce also allows for flexibility in placement and positioning. In this article, we will provide a detailed guide on how to install a plug-in wall sconce in your home.

Tools and Materials

Before you begin the installation process, make sure you have the following tools and materials:

• Plug-in wall sconce
• Wall anchors
• Screws
• Drill
• Tape measure
• Screwdriver
• Pencil
• Wire cutters

Step 1: Preparation

Start by choosing the location where you want to install the plug-in sconce. Make sure the outlet is easily accessible and the sconce is positioned at the desired height. Using a tape measure, mark the position where the sconce will be installed with a pencil.

Step 2: Drill Holes

Using a drill, create two holes where you marked the placement for the sconce. Make sure to use a bit that is the same size or slightly smaller than the wall anchors you will be using.

Step 3: Insert Wall Anchors

Insert wall anchors into the holes you created with the drill. Make sure the anchors are secure and flush with the wall.

Step 4: Attach Mounting Plate

Next, attach the mounting plate of the sconce to the wall using the screws provided. Make sure the plate is level and secure.

Step 5: Connect Wires

Using wire cutters, strip about half an inch of insulation from the wires on the plug-in sconce. Connect the black wire to the black wire on the mounting plate and the white wire to the white wire on the mounting plate.

Step 6: Attach Sconce

Carefully attach the sconce to the mounting plate by aligning the keyhole slots on the back of the sconce with the screws on the mounting plate. Once aligned, slide the sconce down onto the screws.

Step 7: Test

Before using the plug-in sconce, make sure to test it to ensure it is properly wired and attached to the mounting plate. Plug the sconce into the wall outlet and turn it on to confirm it is working.

Conclusion

Installing a plug-in wall sconce is a simple and affordable way to add lighting to any room in your home. By following these step-by-step instructions, you can easily install a plug-in sconce and enjoy the benefits of versatile lighting options. Remember to always exercise caution when working with electricity and consult a professional if you are unsure about any part of the installation process. Happy installing!